Structural BIM & Framing Plans

Structure, modeled once.Communicated everywhere.

Skyline Design Group creates coordinated structural BIM models and framing plans that connect geometry, documentation, coordination and construction information in one controlled workflow.

Request a BIM scope review Explore deliverables

Coordinated model

Framing plans

Controlled source

Skyline BIM support for

Structural engineers

Architects

General contractors

Developers

Fabricators

BIM managers

Model-led structural documentation

Skyline Design Group turns structural intent into organized digital geometry, coordinated views and framing plans that remain connected throughout review and revision cycles.

A structural model should do more than look complete. It should make the project easier to understand.

The model becomes a spatial source for plans, sections, schedules, coordination views, opening reviews, quantity support and issue communication.

Skyline Design Group structures the BIM environment around project uses, required reliability, team standards and milestone decisions—not around unnecessary model complexity.

Structural system coverage

One BIM workflow across multiple framing systems.

Skyline can support a single structural discipline or coordinate hybrid systems within one organized project environment.

System 01

Steel framing models

Columns, beams, girders, braces, trusses, joists, deck interfaces, stairs, edge framing and secondary supports.

System 02

Concrete structure

Foundations, slabs, beams, columns, walls, cores, transfer zones, openings, drops and thickened regions.

System 03

Precast coordination

Panels, planks, double tees, beams, columns, stairs, embeds, bearings, joints, lifting zones and erection interfaces.

System 04

Hybrid structural systems

Coordinated interfaces between steel, concrete, precast, timber, masonry support and light-gauge framing systems.

Framing plan deliverables

Plans that explain the load path, level by level.

Skyline Design Group develops each plan around the information required to locate, identify, coordinate and review the structural system.

Model-driven documentation

Views, tags, dimensions and schedules remain connected

Plans that explain the load path, level by level.

Foundation plans

Footings, grade beams, pile caps, mats, pedestals, walls, pits and base conditions.

Floor framing plans

Primary and secondary framing, member tags, spans, openings, elevations and slab interfaces.

Roof framing plans

Roof beams, joists, trusses, bracing, slopes, curbs, screens and equipment support framing.

Column & wall layouts

Grids orientation, offsets, size tags, splice zones, boundaries and continuity references.

Slab & edge plans

Thickness, steps, depressions, edges, openings, joints, drops and penetrations.

Sections & elevations

Vertical relationships, member depths, levels, transfer zones, supports and interface details.

Schedules

Columns, beams, walls, footings, openings, embeds and model-driven quantity information.

Coordination views

3D zones, clash viewpoints, filtered systems, issue locations and model-review snapshots.

Structural BIM model linked with framing plans sections and schedules in one coordinated workflow

Model-to-plan relationship

Member locations, marks, levels and openings remain linked to coordinated views.

Connected information

The model, framing plans, sections and schedules should agree.

Skyline Design Group builds documentation around coordinated model elements so changes can be reviewed across multiple outputs instead of corrected independently on disconnected sheets.

Geometry

Location, profile, elevation, slope, offset and connectivity.

Identity

Member marks, types, levels, zones and drawing references.

Documentation

Tags, dimensions, details, notes and schedule values.

Status

Work-in-progress, shared, reviewed, issued, revised or superseded.

Multidiscipline coordination

Structural geometry sits at the center of almost every project interface.

Skyline Design Group compares the structural model against surrounding systems to identify questions before they become fabrication or installation constraints.

01Architectural grids, cores, stairs, shafts and facade edges

02Mechanical openings, equipment loads, curbs and support zones

03Electrical and plumbing penetrations through slabs, walls and beams

04Fire-protection mains, hangers and structural clearance zones

05Civil elevations, retaining interfaces, pits, ramps and foundations

06Construction joints, pour breaks, embeds, anchors and temporary conditions

Engineers coordinating structural, MEP and architectural systems to resolve building interfaces early

Coordination viewpoint / Issue 024

Federated review

Resolve the interface before it becomes a field decision.

Skyline Design Group can document clashes, model comments, responsibility, status and resolution through controlled viewpoints and issue logs.

Practical BIM uses

Model only what the project needs—and make every modeled element useful.

Skyline aligns model content with agreed uses, reliability, milestones and team responsibilities so effort is directed toward decisions and deliverables.

Design coordination

Review structural geometry against architecture, services and project constraints.

Drawing production

Generate consistent plans, sections, elevations, details and schedules.

Quantity support

Organize model properties for counts, areas, lengths, volumes and schedule exports.

Construction review

Create zones, viewpoints, filters, sections and issue locations for field communication.

Skyline production workflow

A controlled path from source files to coordinated model issue.

BIM brief & input audit

Skyline Design Group reviews issued files, BIM requirements, coordinate systems, model uses, standards, milestones and known information gaps.

Model architecture

We establish grids, levels, worksets, links, naming rules, view templates, object categories, parameters and drawing organization.

Structural model build

Primary and secondary structural systems are modeled with the geometry and information needed for the agreed project uses.

Framing-plan production

Plans, sections, elevations, schedules, legends and model views are developed from the coordinated structural model.

Coordination & QA/QC

Skyline checks interfaces, dimensions, tags, references, views, schedules, warnings, clashes and revision consistency.

Controlled model issue

Approved models and drawings are packaged with status, issue records, transmittals, review notes and exchange files.

Engineers reviewing BIM models and drawings to ensure quality, coordination and reliable documentation

Skyline internal review / Model 05

Model-to-sheet verification

Geometry, warnings, views, tags, schedules, links and revisions

Structural BIM QA/QC

Model quality is measured by reliability, not visual density.

Skyline Design Group reviews both model health and documentation quality before controlled releases.

Model healthWarnings, duplicate objects, constraints, joins, links, worksets and file performance.

GeometryGrids, levels, member positions, offsets, slopes, openings and structural continuity.

DocumentationView range, tags, dimensions, references, sections, notes, legends and schedules.

CoordinationArchitectural edges, service penetrations, supports, clearances and interface ownership.

Issue controlRevision status, sheet dates, model versions, comments, transmittals and superseded files.

Model definition strategy

Define model content by purpose, responsibility and milestone.

Rather than applying one blanket definition to every object, Skyline Design Group can organize model requirements around element type, project phase, required accuracy and intended use.

Geometric accuracy and tolerances

Required parameters and classification

Responsible model author and reviewer

Authorized project uses

Issue milestone and approval status

Model elementGeometryInformationStatus

Primary beamsCoordinatedType + markShared

Secondary framingCoordinatedType + zoneShared

Slab openingsLocatedOwner + sizeReview

Equipment supportsPreliminaryLoad referenceWIP

Foundation elementsCoordinatedType + levelIssued

Skyline works inside your BIM environment

Platforms and exchange formats are confirmed during project setup.

Autodesk RevitNavisworksAutoCADBIM 360 / ACCTeklaBluebeamIFCNWCBCFDWG / PDF

Commercial applications

Layouts shaped around the way each property performs.

Workplace

Office & workplace

Arrival courts, employee outdoor spaces, shaded walkways, visitor parking and polished corporate identity.

Commercial

Retail & mixed-use

High-visibility frontages, flexible gathering zones, intuitive parking, service access and active pedestrian edges.

Industrial

Industrial & logistics

Heavy vehicle circulation, secure boundaries, employee access, stormwater landscapes and durable screening.

Experience

Hospitality & recreation

Memorable arrivals, guest-oriented circulation, terraces, amenity landscapes and strong visual storytelling.

Information & revision control

Every model issue should have a clear status and history.

Skyline Design Group can manage comments, questions, changes, viewpoints and formal issues through documented registers and controlled model versions.

Model register

File name, version, author, issue date, purpose and status.

Markup log

Reviewer comments tracked through response, incorporation and closure.

Coordination log

Issue location, discipline, owner, priority, response and model impact.

Revision history

Changed sheets, model zones, descriptions, clouds, dates and superseded files.

Skyline model issue register

Structural coordination set

Rev. 06

STR-MOD-01Structural authoring modelIssued06

STR-NWC-01Coordination exportShared06

STR-DWG-L04Level 04 framing plansIssued04

STR-ISS-024Opening coordination viewpointReview02

Project outcomes

A coordinated structural model creates value far beyond the 3D view.

The real value is clearer communication, more consistent documentation, controlled change and better visibility of structural interfaces.

More reliable coordination

A shared structural model gives teams one spatial reference for decisions and reviews.

Cleaner drawing production

Model-driven plans, sections and schedules remain more consistent as the project changes.

Better issue control

Views, sheets, comments and revisions can be tracked through a controlled BIM workflow.

Reusable project data

Structured geometry and parameters can support quantities, handoff and downstream coordination.

Skyline Design Group structural BIM

Send the current files.We’ll define the model path.

Share the latest structural, architectural and coordination files, your BIM standards, required framing plans, exchange formats and milestone dates. Skyline Design Group will review the inputs and define a practical production scope.

Request a BIM scope review

Skyline Design Group provides drafting, BIM, modeling, detailing and production-support services.

Structural design, analysis, calculations, approvals and professional seals remain with the appropriately licensed project engineer.