Steel / Precast / Rebar Detailing

One coordinated model.Three fabrication disciplines.

Detailed structural production packages for steel fabricators, precast manufacturers, reinforcing-steel suppliers, contractors, engineers and BIM teams.

Request a scope review Explore disciplines

Integrated disciplines

Coordinated model

100%

Revision traceability

Realistic steel, precast and rebar fabrication model in one coordinated industrial workspace on site

Integrated detailing model

Steel + Precast + Reinforcement

One coordinated production environment for fabrication, casting, placing, erection and field review.

Built for production teams

Fabricators

Precast plants

Rebar suppliers

General contractors

Structural engineers

BIM managers

From intent to production

We work from engineer-of-record documents and project standards to produce coordinated information for fabrication, casting, reinforcement placement, erection and field verification.

Detailing is where structural design becomes manufacturable information.

Every member mark, panel edge, bar, embed, hole, weld, bolt, sleeve and interface must remain coordinated across models, drawings, schedules, revisions and downstream teams.

Our role is to reduce ambiguity before material reaches the shop floor, casting bed, bending line, delivery truck or job site.

Integrated detailing disciplines

Three specialist packages. One controlled workflow.

Steel fabrication workshop with detailed beams, columns and connection plates ready for production site

Structural steel

Discipline 01

Production-led documentation

Fabrication-ready steel detailing

Translate structural design intent into coordinated shop and erection information for primary framing, secondary steel, connections and miscellaneous metals.

Columns, beams, girders, braces and trusses

Base plates, stiffeners, gussets and connection plates

Bolted and welded connection geometry

Stairs, ladders, handrails and platforms

Joists, deck interfaces and edge angles

Assembly, single-part and erection drawings

Precast concrete

Discipline 02

Production-led documentation

Panel, element and erection detailing

Develop production information for precast elements with coordinated geometry, reinforcement, embeds, lifting requirements, connections, openings and site erection references.

Wall, sandwich and architectural panels

Columns, beams, spandrels and corbels

Hollow-core, solid slabs and double tees

Stairs, landings, balconies and parapets

Lifting inserts, plates, embeds and sleeves

Piece tickets, elevations and erection layouts

Reinforcement

Discipline 03

Production-led documentation

Rebar placement and scheduling

Create readable reinforcement packages that communicate bar geometry, placement, laps, couplers, congestion, pour interfaces and fabrication data.

Foundations, pile caps, walls and columns

Beams, slabs, ramps, stairs and cores

Bar marks, shapes, cut lengths and quantities

Lap, splice, hook and coupler information

Bar bending schedules and placing details

Congestion and constructability reviews

Steel detailing outputs

Drawings arranged around how steel is made and erected.

Steel shop drawings and fabrication plans guiding assembly, erection and production of structural steel

Model intelligence

Member marks stay connected to sheets

Erection drawings

Framing plans, elevations, marks, levels, field-bolt references, sequencing notes and orientation.

Assembly drawings

Complete shop information for built-up members including welds, bolts, plates, holes, cuts and parts.

Single-part details

Fabrication geometry for plates, angles, stiffeners, cleats, brackets and traceable piece marks.

Miscellaneous metals

Stairs, rails, ladders, platforms, canopies, screens, equipment supports and embeds.

Precast concrete panels with embeds and lifting points ready for production and erection planning

Precast assembly logic

Geometry, reinforcement, embeds, lifting and erection in one element record.

Precast element coverage

Every cast element carries production and erection data.

Wall panels

Openings, reveals, reinforcement, embeds, plates and edge conditions.

Sandwich panels

Inner and outer wythes, insulation, connectors and thermal interfaces.

Double tees

Stem and flange geometry, bearing zones, reinforcement and connections.

Hollow-core slabs

Unit layouts, cuts, openings, bearing, grouting and erection references.

Beams & columns

Piece geometry, corbels, pockets, inserts, reinforcement and interfaces.

Stairs & balconies

Flights, landings, profiles, embeds, lifting points and supports.

Rebar intelligence

Reinforcement information that works in the yard and at the pour.

Placement drawings and schedules are organized so bending, bundling, delivery, installation, inspection and revision decisions reference the same controlled bar data.

Foundations

Footings, grade beams, pile caps, mats, pedestals and retaining walls.

Vertical structure

Columns, shear walls, cores, pilasters and boundary elements.

Horizontal structure

Slabs, beams, drop panels, transfer zones, ramps and stairs.

Special zones

Openings, embeds, penetrations, couplers and congestion.

Reinforcement cage with tied rebar prepared for fabrication, placement, inspection and concrete pour

B24

Bar mark

20 mm

Diameter

150 c/c

Spacing

Bar bending schedules

Drawings and fabrication data remain synchronized.

Each scheduled bar carries the information required for identification, bending, quantity control, placement and revision tracking.

MarkDia.Qty.LengthStatus

B2420366840Released

B2516723120Released

B2625184485Checked

B27121441280Checked

B2820247250Hold

Interface coordination

The highest-risk details often sit between disciplines.

01Structural-to-architectural edge and opening alignment

02MEP penetrations, sleeves, blockouts and clearances

03Anchor bolts, embeds, plates and cast-in hardware

04Steel-to-precast and precast-to-concrete interfaces

05Access for welding, bolting, placing, lifting and erection

06Temporary conditions, pour breaks and sequencing

Engineers reviewing coordinated drawings to resolve construction interface conflicts before fabrication

Coordination review

Detect the conflict before fabrication locks it in.

Production workflow

A controlled path from source documents to fabrication release.

Input audit

Review drawings, models, specifications, criteria, standards, scope boundaries, milestones and missing information.

Model setup

Establish grids, levels, naming rules, numbering, templates, references and coordination backgrounds.

Detail development

Build members, panels, reinforcement, connections, embeds, assemblies, plans, details and schedules.

Coordination

Check interfaces against architecture, MEP, civil, equipment, access, temporary works and sequencing.

QA/QC review

Verify geometry, marks, quantities, dimensions, references, materials, notes, revisions and consistency.

Controlled issue

Package deliverables with revision status, issue logs, transmittals, resolved comments and agreed formats.

Engineers checking drawings and models to verify fabrication quality before project release safely

Model-to-sheet verification

Geometry, marks, schedules, notes, references and revisions

QA/QC framework

Quality is checked at the model, drawing, schedule and issue level.

GeometryGrids, levels, profiles, dimensions, cuts, holes and interfaces.

IdentityMember, assembly, panel, piece, bar and drawing marks.

FabricationMaterials, welds, bolts, bends, plates, embeds and quantities.

CoordinationOpenings, clearances, supports, penetrations and adjacent systems.

DocumentationNotes, references, schedules, revisions and status.

Standards & compatibility

Built around your regional and company standards.

Codes & manuals

AISCAWSCRSIACIPCIASTMBS / ENAS / NZSProject standards

Software & exchange

TeklaRevitAutoCADNavisworksBluebeamPDFDWGRVTIFCNWCNC / DXF

Project applications

Scalable detailing for repetitive systems and complex frames.

Industrial & manufacturing

Process buildings, platforms, pipe racks, equipment frames, mezzanines and heavy structural interfaces.

Commercial & mixed-use

Office, retail, hospitality, podium, parking, atrium, feature stair and envelope-support structures.

Residential & multifamily

Towers, apartments, townhomes, balconies, stairs, transfer structures and repetitive precast systems.

Infrastructure & institutional

Transit, education, healthcare, utility, civic and specialized public-sector structural packages.

RFI & revision control

Assumptions and changes stay visible throughout production.

Open design items are logged, located, assigned and carried through resolution so every issue package has a traceable information history.

Project issue register

Open coordination items

04 active

RFI-041Beam / panel embed alignmentEngineer

RFI-042MEP sleeve through transfer beamMEP

RFI-043Stair landing support elevationArchitect

RFI-044Rebar congestion at base plateStructural

Production outcomes

Better information reduces downstream uncertainty.

Fewer field conflicts

Resolve geometry and interface issues before material is produced.

Clearer fabrication

Give shop teams direct organized and traceable production information.

Stronger quantity control

Keep piece, panel and bar data aligned with drawings and releases.

Cleaner approvals

Present structured packages that are easier to review and revise.

Start with the current set

Send the structure.We’ll detail the production path.

Share the latest structural and architectural files, specifications, target deliverables, standards and milestone dates. We will review the inputs and define a practical detailing scope.

Request a scope review

Skyline Design Group provides drafting, detailing, BIM and production-support services.

Engineering design, calculations, approvals and seals remain with the appropriately licensed project engineer.

One coordinated model.Three fabrication disciplines.

Detailing is where structural design becomes manufacturable information.

Three specialist packages. One controlled workflow.

Fabrication-ready steel detailing

Panel, element and erection detailing

Rebar placement and scheduling

Drawings arranged around how steel is made and erected.

Erection drawings

Assembly drawings

Single-part details

Miscellaneous metals

Every cast element carries production and erection data.

Wall panels

Sandwich panels

Double tees

Hollow-core slabs

Beams & columns

Stairs & balconies

Reinforcement information that works in the yard and at the pour.

Foundations

Vertical structure

Horizontal structure

Special zones

Drawings and fabrication data remain synchronized.

The highest-risk details often sit between disciplines.

Detect the conflict before fabrication locks it in.

A controlled path from source documents to fabrication release.

Input audit

Model setup

Detail development

Coordination

QA/QC review

Controlled issue

Quality is checked at the model, drawing, schedule and issue level.

Built around your regional and company standards.

Codes & manuals

Software & exchange

Scalable detailing for repetitive systems and complex frames.

Industrial & manufacturing

Commercial & mixed-use

Residential & multifamily

Infrastructure & institutional

Assumptions and changes stay visible throughout production.

Better information reduces downstream uncertainty.

Fewer field conflicts

Clearer fabrication

Stronger quantity control

Cleaner approvals

Send the structure.We’ll detail the production path.

Frequently Asked Questions

About

Services

Company

Recognition

Need Official Documentation?