01
Mechanical Modeling
Coordinated HVAC systems modeled for constructability, access, routing efficiency and dependable downstream documentation.
Ductwork and fittingsAir terminals and equipmentHydronic pipingMechanical room layouts
MEP Modeling & Coordination
Build it once.Build it right.
Skyline Design Group transforms disconnected MEP drawings into one coordinated, constructible digital model—helping your team resolve clashes before they become field delays, change orders and lost margin.
01Revit MEP Modeling
02Navisworks Coordination
03Clash Resolution
04Field-Ready Output
Coordination before construction
The most expensive MEP clash is the one discovered after installation begins.
Congested ceiling zones, inaccessible equipment, misaligned openings and competing service routes can quickly turn a clean set of drawings into weeks of field rework.
Skyline Design Group gives contractors, engineers and developers a coordinated BIM environment where constructability decisions are made early, documented clearly and carried into installation-ready deliverables.
Digital coordinationField certainty
Skyline Advantage
One
coordinated source of truth for every building system.
Architecture, structure and all MEP trades are reviewed together—so decisions happen in the model, not in the middle of installation.
Complete MEP scope
Every system. One coordinated model.
Flexible production support for design teams, general contractors, specialty subcontractors and owners across commercial, residential, industrial and institutional work.
02
Electrical Modeling
Detailed electrical layouts that organize power, lighting and containment systems around architectural and structural constraints.
Cable trays and conduitsLighting and power layoutsEquipment and panelsClearance coordination
03
Plumbing Modeling
Precisely routed plumbing systems with slopes, service zones and installation access considered before work reaches the field.
Domestic water systemsSanitary and vent pipingStorm drainagePlumbing equipment layouts
04
Fire Protection
Spatially coordinated fire protection models designed to integrate cleanly with ceilings, structure and the complete MEP network.
Sprinkler mains and branchesRiser coordinationHead placement supportCeiling coordination
The coordination workflow
From model intake to field-ready output.
A repeatable, auditable process
01
Model Intake & BIM Setup
We review contract drawings, BIM execution requirements, consultant backgrounds and your internal standards. Models are structured with the correct coordinates, worksets, naming conventions and levels from day one.
02
Discipline Modeling
Skyline Design Group develops mechanical, electrical, plumbing and fire protection systems to the agreed level of development, preserving design intent while improving model clarity and field usability.
03
Federation & Clash Detection
All discipline models are combined with architectural and structural backgrounds. We run structured clash tests in Navisworks and separate true installation conflicts from low-value model noise.
04
Coordination & Resolution
Our team studies routing alternatives, access requirements, elevations and sequencing. Issues are documented, assigned and resolved through focused coordination cycles with your project stakeholders.
05
QA/QC & Constructability Review
Before delivery, models are checked for completeness, connectivity, clearances, slopes, duplicate elements, annotation consistency and compliance with the approved coordination decisions.
06
Field-Ready Deliverables
You receive clean coordinated models, reports, sheets and supporting views that help contractors fabricate, install and communicate with far less uncertainty in the field.
Clash detection is only useful when it leads to resolution.
Skyline Design Group does more than generate thousands of clash points. We organize, prioritize and resolve the issues that matter to installation—using trade sequencing, access, slope, elevation and construction tolerance as part of every decision.
Prioritized by constructability, not just software proximity rules.
01
Hard clashes
Physical intersections between systems, structure and architecture.
02
Soft clashes
Required access, maintenance, insulation and safety clearances.
03
Workflow clashes
Installation sequencing, prefabrication zones and trade access conflicts.
Project deliverables
Clear outputs for design, coordination and installation.
Deliverables are tailored to your BIM execution plan, project milestone and downstream use.
Coordinated Revit MEP models
Navisworks federated coordination model
Clash detection and status reports
RFI and coordination issue logs
MEP coordination drawings
Sleeve and penetration drawings
Builder’s work and opening drawings
Equipment and maintenance clearance views
Spool-ready or fabrication support models
As-built model update support
BIM 360 / Autodesk Construction Cloud support
Model health and QA/QC reports
Your production partner
Integrated with your team. Accountable to your deadlines.
Why Skyline Design Group
Technical capacity without the production bottleneck.
01
Field-aware modeling
Models developed around access, installation and actual construction constraints.
02
Standards alignment
Production that follows your templates, families, naming and document controls.
03
Scalable support
Flexible capacity for single zones, full buildings or multi-project programs.
04
Visible accountability
Clear issue ownership, milestone tracking and responsive communication.
Built for complex project environments
Commercial/Multi-Family/Healthcare/Education/Industrial/Hospitality/Data Centers/Mixed-Use
Frequently asked questions
The details behind a coordinated delivery.
We can support projects from design-intent modeling through detailed coordination and fabrication-oriented development. The exact LOD, model uses and element responsibilities are defined during project scoping so the output matches your contract requirements and trade needs.
Yes. We can align with your templates, shared parameters, naming conventions, worksets, view standards, sheet setup and file exchange process. Our goal is to function as an extension of your internal production team rather than forcing a separate workflow.
We create a structured clash matrix, group related conflicts, remove false positives, assign responsibility and track each issue through resolution. Reports can be delivered through Navisworks, spreadsheets, BIM 360/ACC or the issue-management platform used by your team.
Yes. Skyline Design Group can organize production by building, zone, floor or discipline and scale resources around milestone dates. Repetitive project types also benefit from standardized families, routing rules and repeatable QA checklists.
Skyline Design Group operates as a BIM, drafting and production-support partner. We model and coordinate from the design information supplied by the project’s responsible licensed professionals and do not replace required engineering review, approval or stamping.
Start a projectSkyline Design Group
Bring us the drawings. We’ll help make them buildable.
Share your current models, project stage and coordination milestone. Skyline Design Group will outline a practical production plan around your scope, standards and schedule.
Revit MEP ModelingNavisworks Clash CoordinationBIM / VDC Production Support
